270 kr
Rope set for wheel cylinder with 13/16" inner diameter contains 2 piston gaskets, 2 dust covers and the control spring in the middle
Check carefully that the diameter is 13/16″ = 20.64mm on your wheel cylinder that you are going to refurbish.
Take apart the wheel cylinder and check that it is 13/16″ = 20.64mm inside. Clean the old pistons, hone or polish the inside of the cylinder with fine sandpaper. Wash clean with T-Spirit or thinner. If there is rust damage or cracks in the cylinder, it cannot be refurbished, in that case discard it and buy a new complete cylinder. If it is in good condition, assemble it with new gaskets that you lubricate with brake fluid.
