Välj årsmodell för att se om produkten passar din bil.
Phillips screw 10-32 UNF = 4.83mm with flat head and countersunk washer
10 kr
SKU: BUL-1305XPT
Enhet: piece
Description
A standard screw that has a diameter of 10-32 UNF approx: 4.83mm. The length of the screw is 5mm measured under the skull. It is therefore an American fine threaded screw that has an outer diameter of 4.83mm, which is then called 10-32. It has 32 threads in one inch = 25.4mm, if you are unsure, you can count the number of threads the screw has in 25.4mm. You measure the length under the skull and it is stated in millimeters. We have a lot of different brands in stock. It differs in color and surface treatment as well as how long the part of the screw is threaded. It is a normal standard model of all screws we stock. We deliver what we have in stock at the moment.
Tip!
Note that you must measure the length of the screw under the skull, you measure the length in millimeters. You should not count on the screw head when measuring the length of the screw.
Check the picture how to measure.
The difference between UNC and UNF is the number of threads per inch.
UNF is fine-threaded with more threads per inch than the coarse-threaded UNC thread.
The smaller sizes are divided from 0 to 12 and are called numerical threads. We call them "Screws"
The larger sizes start with 1/4″ and so on. We call them "Bultar"
