Generally
Gasket kit with piston to refurbish an original 1-1/8″ master cylinder
Välj årsmodell för att se om produkten passar din bil.
Rope set Master cylinder
865 kr
Tip!
Take apart the master cylinder and check that it is 1-1/8″ = 28.58mm inside.
Clean it properly. Hone or polish the inside of the cylinder with fine sandpaper. Wash clean with T-Spirit or thinner.
If there is rust damage or cracks in the cylinder, it cannot be renovated, then order a complete new master cylinder from us
If it is in good condition, assemble it with new gaskets that you lubricate with brake fluid, check that all parts are facing the right way and end up in the right place.
