Välj årsmodell för att se om produkten passar din bil.

Water pump in original design without water outlet for heating package.

4 975 kr

A water pump in original design that lacks the water outlet for the heating package

SKU: KYL-1442 Enhet: piece

Description

A water pump in original design that lacks the water outlet for the heating package. So this water pump has not the socket for the heat pack hose. The pump is either new or refurbished, we deliver what we have in stock at the moment. It is complete with the gaskets you need for assembly. If you have a pump like this, one of the heat pack hoses should go to the side end of the radiator.

Tip!

Check the condition of all radiator hoses when replacing the water pump.
The thermostat is an important part of the cooling system, in what condition is yours?
What is the condition of the fan belts?
Do not tighten the fan belts too tightly as you will destroy the water pump bearing.
Change the coolant every 5 years, the rust protection becomes worse with old coolant. You should have a mixture of 50-60% glycol and you raise the boiling point, then you also have good rust protection. Many engines and water pumps rust from the inside just because you try to save on the glycol, and not least you avoid a frozen engine block. The garage where the car is parked over the winter can be without electricity and heat. Every spring we get phone calls from customers with frozen engine blocks.