Description
1 st kolv komplett med kolvbult med överdimensionen +.030″ för en cylinder diameter på 4.16” = 105,66mm. Kolven är nytillverkad och motsvarar originalet i kvalitet och utförande. Oljeringspåret är 4,76mm brett
1 450 kr
Piston + .030″ oversize
1 st kolv komplett med kolvbult med överdimensionen +.030″ för en cylinder diameter på 4.16” = 105,66mm. Kolven är nytillverkad och motsvarar originalet i kvalitet och utförande. Oljeringspåret är 4,76mm brett
Be careful when installing the connecting rod so that you do not press the piston pin askew and damage the piston.
Be careful to turn the piston the right way. If there is a marking on the piston, it must be turned forward.
Here you get the measurements of the most common cylinder dimensions. Scrape off the soot and then measure at the top of the cylinder in the engine block, don't measure on the piston as it could be wrong. It is fine to measure with an ordinary caliper if you are accurate
STD 4.13” = 104.90mm
+020” 105.41mm
+030” 105.66mm
+040” 105.92mm