45 kr
Brake pipe joint to 1/4″ brake pipe. Join 2 brake pipes 1/4″ = 6.35mm that are tapered and have a threaded nipple, e.g. BRO-1052 at the end, with this nipple. Check the dimensions carefully, not all pipes for a brake system have the same dimensions.
You can join our pre-conical brake pipes with nipples with this joint sleeve. Take for example 2 pcs BRO-4600 152cm brake pipe, thread them together with this brake pipe joint and you get a 304cm brake pipe ready to mount. Easy! you avoid all coning tools and can combine the tubes as you wish. Replace all the brake pipes in a substantial way and that it will be a nice result.
Are you unsure if your brake pipes fit in this nipple? Then measure the outer diameter of the pipe with a caliper, it should be approx. 6.3mm, then measure the outer diameter of the pipe's threaded nipple, measure straight across the thread. That measurement should be approx: 11mm. If this is true, then the pipes fit
