Välj årsmodell för att se om produkten passar din bil.
Distribution block brake pipe 3 is weighed at the rear. For cars with front disc brakes
445 kr
ATTENTION! Only suitable for cars with front disc brakes
SKU: BRO-1695
Enhet: piece
Description
This is the rear distributor block that branches the brake pipes on the rear axle. There is one threaded hole for the brake hose and two threaded holes for 3/16″ brake pipe. The distributor block is a used Cadillac original that is ready to install, refurbished with all threaded connections and taper seats in perfect condition.
Tip!
Check carefully that all threads and the pipe cone at the front of the brake pipes are in good condition. You must be able to turn the nipple by hand and it must not bind, lubricate with rust remover if the nipple is stuck on the brake pipe. Replace brake pipes that are questionable. When screwing in the brake pipes, make sure that the threads do not go crooked. You should be able to screw in the brake pipe nipple a few turns by hand without tools, if it is too heavy right from the start, something is wrong. Be careful, it is very easy to damage the threads if the pipe nipple comes in crooked from the start.
