Välj årsmodell för att se om produkten passar din bil.
Slotted screw 10-32 UNF high straight head
15 kr
SKU: BUL-1325SH
Enhet: piece
Description
A special slotted screw that has a thread called 10-32 UNF approx: 4.83mm. The length of the screw is 9.5 mm measured under the head. The head is 4.6mm high and has a diameter of 7.6mm. It is therefore an American fine threaded screw that has an outer diameter of 4.83mm, which is then called 10-32. It has 32 threads in an inch = 25.4mm, if you are unsure you can count the number of threads the screw has on 25.4mm. You measure the length under the head and it is stated in millimeters.
Tip!
Note that you must measure the length of the screw under the skull, you measure the length in millimeters. You should not count on the screw head when measuring the length of the screw.
Check the picture how to measure.
The difference between UNC and UNF is the number of threads per inch.
UNF is fine-threaded with more threads per inch than the coarse-threaded UNC thread.
The smaller sizes are divided from 0 to 12 and are called numerical threads. We call them "Screws"
The larger sizes start with 1/4″ and so on. We call them "Bultar"
