Tätnings sats front pump växellåda

Seal kit front pump gearbox

375 kr

In stock

SKU: VAX-4226 Enhet: clause

Description

This kit contains what you would normally need to seal a front transmission leak. The contents are as follows: 1st paper gasket that sits between the oil pump housing and the gearbox housing, 1st Square rubber ring that sits in the outer part of the oil pump housing and seals against the gearbox, 8st Gaskets that sit under the head of the oil pump bolts, 1st Pump bushing that the turbine centers and slides against. As well as 1 packing box that seals against the turbine neck.

Tip!

The main rule when you take down and set up a TH 400 gearbox is that the turbine must always sit on the gearbox. So when the box is taken down, the turbine must remain on the box, and when the box is reassembled, the turbine must sit on the gearbox firmly pressed into the oil pump. If the turbine slides out, there is a great risk that you will crush the oil pump drive when you assemble the gearbox.