Generally
Rubber membrane, Vacuum membrane inside Moraine brake servo, only fits Moraine brake servo
Välj årsmodell för att se om produkten passar din bil.
Vacuum membrane for Moraine brake servo
1 595 kr
Fits Moraine brake servo only
Tip!
When you mount the diaphragm, lubricate the edge with a thin layer of silicone grease, it is easier to twist the servo can. If you are going to paint the servo can, do it before using the silicone grease, it is difficult to paint on silicone greased surfaces.
Bendix or Moraine?
How do you know if you have a Bendix brake servo?
If you unscrew the master cylinder from the brake servo, a round rod with an adjusting screw protrudes from the brake servo.
There is a snap ring that holds the piston in the master cylinder
You can also see that there are small screws that hold the 2 parts of the brake servo together. How do you know if you have a Moraine brake servo?
If you unscrew the master cylinder from the brake servo, a 1″=25mm thick aluminum piston rod sticks out from the brake servo.
There is no piston in the master cylinder, it is attached to the brake servo.
The 2 parts of the brake servo are held together by twisting them together, such as a jam jar. You can also see that there are no screws that hold the 2 parts of the brake servo together.
