Välj årsmodell för att se om produkten passar din bil.

Vacuum bell 2nd stage, Three carburetors intake

1 735 kr

SKU: BRA-5960 Enhet: piece

Description

The vacuum bell that opens the front and rear carburetors. That is, the 2nd stage vacuum bell. This vacuum bell is newly manufactured in almost exact original design. The only thing that needs to be modified is that an extra small hole of 5.5mm should be drilled in the mounting bracket, the drilling template is of course included when you buy the vacuum bell. Don't forget to fine-tune the pull rod by bending it so that the 2nd stage damper closes properly. If the rod is too short, the vacuum bell will break. The same applies if the choke is on and you connect vacuum to the bell, which will then break.

Tip!

Use the drill template that comes with the kit to measure where you will drill the 5.5mm hole in the mounting bracket, so think first and then drill. Don't forget to fine-tune the tie rod by bending it so that the 2nd stage damper closes properly. If the tie rod is too short, the vacuum bell will break. The same applies if the choke is on and you connect vacuum to the bell, which will then break.