Välj årsmodell för att se om produkten passar din bil.

Master cylinder 4 bolted Bendix

8 825 kr

SKU: BRO-4732 Enhet: piece

Description

Factory refurbished Bendix master cylinder, which is bolted to the brake servo with 4 bolts. The master cylinder is lined with a brass lining that can always be damaged by rust. It happens that the renovation company mills a larger hole in the cylinder, then a brass tube is pressed into the main cylinder, which is then drilled to the original dimension. After that, everything is assembled with new seals and the piston is also replaced if there is damage to the old one. This method results in a wear-resistant master cylinder with original diameter and function like a factory new master cylinder.

Note! The master cylinder is delivered without a screw cap, so the picture is not correct. 

Tip!

Before installing the master cylinder, secure it in the vise and fill with brake fluid. Take a screwdriver and push the piston forward, then hold the brake pipe holes with your fingers and release the piston back to the end position. Repeat this until you have pumped all the air out of the master cylinder, now it is much easier to get the air out of it after assembly.

Bendix or Moraine?

The Bendix master cylinder is screwed to the brake servo with 4 bolts.

The Moraine master cylinder is screwed to the brake servo with 2 bolts.

You may also like…