Välj årsmodell för att se om produkten passar din bil.
Master cylinder Bendix
1 720 kr
SKU: BRO-5794
Enhet: piece
Generally
Brand new Bendix master cylinder
Tip!
Before installing the master cylinder, secure it in the vise and fill with brake fluid. Take a screwdriver and push the piston forward, inward then hold the brake pipe hole with a finger release the piston back to the end position. Repeat this until you have pumped all the air out of the master cylinder, now it is much easier to get the air out of it after assembly
Bendix or Moraine?
How do you know if you have a Bendix master cylinder?
If you unscrew the master cylinder from the brake servo, a round rod with an adjusting screw protrudes from the brake servo.
There is a snap ring that holds the piston in the master cylinder
You can also see that there are small screws that hold the 2 parts of the brake servo together. How do you know if you have a Moraine master cylinder?
If you unscrew the master cylinder from the brake servo, a 1″=25mm thick aluminum piston rod sticks out from the brake servo.
There is no piston in the master cylinder, it is attached to the brake servo.
The 2 parts of the brake servo are held together by twisting them together, such as a jam jar. You can also see that there are no screws that hold the 2 parts of the brake servo together.
