Välj årsmodell för att se om produkten passar din bil.

J-Lister at the front of the front door

1 610 kr

Do you have water on the front floor? The J-Listers are almost always the cause. Change them!

SKU: GUM-0326 Enhet: couple

Description

These J-Lists are of the best quality with the right thickness and length, the kit contains a pair both left and right side. J-List is what we call the rubber strip that sits at the front edge of the door towards the front screen. It is shaped like a J and has the function of directing the water from the side of the roof, door and windshield down into a drilled hole at the front edge of the door. The hole is at the bottom of the J.et (check the pictures). The water is thus led into the door and there it is rustproof painted and treated so that the water does not damage the plate, then the water continues down inside the door and flows out through the rectangular holes in the bottom of the door. Those holes are outside the door rubber strip, so water can continue downwards on the outside of the threshold under the door. Look at your car and you will understand the function of this rubber strip. The function of this strip is very important, if you don't have the J Strip installed correctly or if you don't have it, you will have a lot of water on the floor. The biggest cause of water leakage so that it gets wet on the front floor is this strip.

Tip!

When you install the J-Lists, you must make sure that you glue all the way under the rubber. It must be completely tight between the rubber and the front edge of the door, so that the water is led like a funnel straight to the drainage hole. It can be cramped and difficult to get these moldings perfect, the optimal thing is to mount them when the front fenders are not in place. But it is also possible to mount them with the screens in place. As usual, think first and assemble later.