Description
8 pieces of pistons complete with piston bolts and locking rings for the piston bolts. The pistons correspond to the original in quality and design.
All pistons are weighed and weight adjusted so that they all have the same weight.
Välj årsmodell för att se om produkten passar din bil.
Piston set 8 pcs Std
6 845 kr
Piston set in standard dimension
Tip!
1949 Has a sliding bushing in the connecting rod hole for the piston pin, therefore there are circlips mounted in the pistons so the piston pin does not slide out. Check the connecting rod bushings, if they are bad replace them.
Pay attention so that you turn the piston the right way, If there is a marking on the top of the piston, it should be turned forward.
Specifications
Here you get the measurements of the most common cylinder dimensions. Scrape off the soot and then measure at the top of the cylinder in the engine block, don't measure on the piston as it could be wrong. It is fine to measure with an ordinary caliper if you are accurate
STD 3.8125” = 96.84mm
+020” 97.35mm
+030” 97.60mm
+040” 97.85mm
+060” 98.36mm
