Välj årsmodell för att se om produkten passar din bil.
Radiator hose upper
345 kr
SKU: KYL-2095
Enhet: piece
Generally
A molded radiator hose of the highest quality. On some cars, it may sometimes be necessary to stretch the hose and not mount it so far into the connection pipe on the radiator for the hose to be sufficient. But if you don't want it, you can use the radiator hose called KYL-2004 instead. But it won't be as stylish, we think anyway. Under related products below you will find a suitable hose clamp for this hose.
This is what the hose we have in stock looks like mounted on a 1959 with A/C
This is a picture of how an original hose (we think it is) is fitted to a 1959 low miler with A/C. Very similar to the hose we sell, we think.
Tip!
The new hose may have to be cut off a piece. Check carefully that you cut it in the right place, sometimes it has to be shortened at both ends. But check carefully before, if the cut is in the wrong place, you will have to buy a new hose.
Change the coolant every 5 years, the rust protection becomes worse with old coolant. You should have a mixture of 50-60% glycol and you raise the boiling point, then you also have good rust protection. Many engines and water pumps rust from the inside just because you try to save on the glycol, and not least you avoid a frozen engine block. The garage where the car is parked over the winter can be without electricity and heat. Every spring we get phone calls from customers with frozen engine blocks