Välj årsmodell för att se om produkten passar din bil.
Radiator hose lower, modified for easier installation
345 kr
SKU: KYL-2095-1
Enhet: piece
Description
A molded radiator hose that is not shaped like the original radiator hose, but easier to install. If you don't mind that the lower radiator hose has a different shape than the original, buy this one. (It's actually the same hose as the upper one, but fits well as a lower hose too) It's easier to get it to fit than the original hose. Under related products below you will find a suitable hose clamp for this hose.
Tip!
The new hose may have to be cut off a piece. Check carefully that you cut it in the right place, sometimes it has to be shortened at both ends. But check carefully before, if the cut is in the wrong place, you will have to buy a new hose.
Change the coolant every 5 years, the rust protection becomes worse with old coolant. You should have a mixture of 50-60% glycol and you raise the boiling point, then you also have good rust protection. Many engines and water pumps rust from the inside just because you try to save on the glycol, and not least you avoid a frozen engine block. The garage where the car is parked over the winter can be without electricity and heat. Every spring we get phone calls from customers with frozen engine blocks