Välj årsmodell för att se om produkten passar din bil.

Renovation kit De Luxe Moraine brake servo

4 490 kr

This kit fits the Moraine Brake Servo and Master Cylinder and is the most complete refurbishment kit we have.

SKU: BRO-90599 Enhet: clause

Generally

A De luxe renovation kit that contains even more parts than what is in the big kit. It comes with parts for both the master cylinder and the brake servo unit, the piston for the master cylinder is also included. It contains most of what you might need to do a full overhaul on your Moraine brake servo, master cylinder. But it should be pointed out that there are parts in a brake servo that are not included and are also not newly manufactured. But this is the most complete kit we can get hold of.

Tip!

Before you take apart the brake servo, mark how the parts fit together so that one part does not come up and down after assembly. When you have to twist the brake servo together after you have installed a new rubber diaphragm, lubricate the edge with a little silicone grease and it will be easier to twist together.

Bendix or Moraine?

How do you know if you have a Bendix master cylinder?
If you unscrew the master cylinder from the brake servo, a round rod with an adjusting screw protrudes from the brake servo.
There is a snap ring that holds the piston in the master cylinder
You can also see that there are small screws that hold the 2 parts of the brake servo together. How do you know if you have a Moraine master cylinder?
If you unscrew the master cylinder from the brake servo, a 1″=25mm thick aluminum piston rod sticks out from the brake servo.
There is no piston in the master cylinder, it is attached to the brake servo.
The 2 parts of the brake servo are held together by twisting them together, such as a jam jar. You can also see that there are no screws that hold the 2 parts of the brake servo together.