Generally
Rope kit for rear wheel cylinder with 1″ inner diameter, contains 2 piston gaskets, 2 dust covers and the control spring in the middle.
This rope kit only fits wheel cylinders with 1″ =25.4mm inner diameter, check the diameter carefully.
Välj årsmodell för att se om produkten passar din bil.
Rope set wheel cylinder 1″ Rear
145 kr
Rope kit for wheel cylinder with 1″ inner diameter, this diameter was not used by the factory. But was often fitted when changing wheel cylinders. Check the inside diameter of your old cylinder carefully. Or replace both sides with new 1″ wheel cylinders
Tip!
Take apart the wheel cylinder and check that it is 1″ = 25.4mm inside. Clean the old pistons, hone or polish the inside of the cylinder with fine sandpaper. Wash clean with T-Spirit or thinner. If there is rust damage or cracks in the cylinder, it cannot be renovated, in that case discard it and buy new complete 1″ wheel cylinders for both sides. If it is in good condition, assemble it with new gaskets that you lubricate with brake fluid.
