Generally
Gasket kit with piston to refurbish an original 1″ Moraine 1967 master cylinder
Välj årsmodell för att se om produkten passar din bil.
Rope set Master cylinder Moraine
725 kr
Rope kit for Moraine 1967 original master cylinder
Tip!
Take apart the master cylinder and check that it is 1″ = 25.4mm inside.
Clean it properly. Hone or polish the inside of the cylinder with fine sandpaper. Wash clean with T-Spirit or thinner.
If there is rust damage or cracks in the cylinder, it cannot be renovated, then order a new complete master cylinder from us.
If it is in good condition, assemble it with new gaskets that you lubricate with brake fluid, check that all parts are facing the right way and end up in the right place.
Moraine Or Bendix?
Moraine There is no screw under the master cylinder. There is a 6mm deep pit in the piston where the pin from the brake servo goes in. Bendix
Under the master cylinder is a screw that goes straight up into the cylinder and holds the piston in place. There is a 42mm deep pit in the piston where the pin from the brake servo goes.
