Välj årsmodell för att se om produkten passar din bil.

Shield bolt 1/4″ UNC =6.35mm with guide and washer

25 kr

Length 22mm
The diameter of the tray 19mm

SKU: BUL-1420BS Enhet: piece

Description

This is a black body bolt with steering that has a thread diameter of 1/4″ UNC approx: 6.35mm and is approx: 22mm long. Used to mount screens and similar body parts. The bolt has a rotatable lock washer in the skull. It is therefore an American coarse threaded bolt that has an outer diameter of 6.35mm, which is then called 1/4″. It has 18 threads in one inch = 25.4mm, if you are unsure, you can count the number of threads the screw has in 25.4mm. The length is the total length of the bolt including guidance from the washer, it is stated in millimeters. The diameter of the tray is 19mm.

Tip!

Note that you must measure the length of the screw under the skull, you measure the length in millimeters. You should not count on the screw head when measuring the length of the screw.

Check the picture how to measure.

The difference between UNC and UNF is the number of threads per inch.

UNF is fine-threaded with more threads per inch than the coarse-threaded UNC thread.
The smaller sizes are divided from 0 to 12 and are called numerical threads. We call them "Screws"
The larger sizes start with 1/4″ and so on. We call them "Bultar"