Välj årsmodell för att se om produkten passar din bil.

Large rope set for servo steering gear, early 1953

3 960 kr

Early 1953, before casting number 3152 on the power steering gear and the outer diameter of the pitman shaft stuffing box is approx: 36.75mm.

SKU: STY-9152-1 Enhet: clause

Generally

Renovation kit for the steering gear, contains gaskets, stuffing boxes, seals, needle bearings, ball bearings and bushings, most of what you need to renovate the steering gear. This fits an early 1953, steering gear number lower than 3142. Check the outer diameter of the pitman shaft stuffing box, it is approx: 36.75mm then it is an early 1953.

A Cadillac steering wheel like this consists of 2 different sections.
The part that manages the power steering has 2 pressure hoses that go to the power steering pump, where you fill Automatic transmission oil type "A" or a power steering oil. The other part is the shell part itself. There you use the steering gear oil. If you completely disassemble the steering gear, lubricate all parts in the steering gear with this oil, then top up to the correct level.

Tip!

Keep an eye on the oil levels in both the auger part and the power steering part after you assemble the auger and add oils, don't overfill either. Keep track of which oil should be where, otherwise it won't be good. The part that manages the power steering has 2 pressure hoses that go to the power steering pump, where you fill Automatic transmission oil type "A" or a power steering oil and it is filled in the power steering pump. The other part is the shell part itself. There you use the steering gear oil.