Välj årsmodell för att se om produkten passar din bil.

Water pump for cars with 2 belts for the power steering pump

3 395 kr

This pump fits cars that have 2 belts for the power steering pump. This pump is only 24mm thick where the belts pass so it is exactly the right pump to accommodate both belts. Just like the original.

SKU: KYL-1451-1 Enhet: piece

Generally

This pump fits cars that have 2 belts for the power steering pump.
This pump is only 24mm thick where the belts pass so it is exactly the right pump to accommodate both belts. Just like the original.
Complete water pump with all the gaskets you need for assembly.

Tip!

Check the condition of all radiator hoses when replacing the water pump.
The thermostat is an important part of the cooling system, in what condition is yours?
What is the condition of the fan belts?
Do not tighten the fan belts too tightly as you will destroy the water pump bearing.
Change the coolant every 5 years, the rust protection becomes worse with old coolant. You should have a mixture of 50-60% glycol and you raise the boiling point, then you also have good rust protection. Many engines and water pumps rust from the inside just because you try to save on the glycol, and not least you avoid a frozen engine block. The garage where the car is parked over the winter can be without electricity and heat. Every spring we get phone calls from customers with frozen engine blocks.